Many people may have difficulty with water transfer printing, but thankfully, it’s not as hard as it seems. There are a number of common mistakes beginners often make when working with this medium, and by taking the time to prepare before starting the water transfer printing process, these mistakes can be easily avoided. It can be difficult for beginners to do things precisely if they don’t know what mistakes not to make. You can learn about various types of printing and scanning services being used in business organizations, on this website: https://www.bringingcreativity2life.com
Table of Contents
1- Failing to Decide on the Correct Size Ahead of Time
If you fail to decide on the correct size ahead of time, you may end up with a print that is either too small or too large to use. It would help if you took note of your fabric size when deciding what size is best for you. Otherwise, you might be stuck with leftover water transfer prints that have nothing to do with the project.
2- Failing to Prepare the Fabric Properly
If you fail to prepare the fabric properly, you will have difficulty getting your water transfer print to look like anything other than a splotch. It would be best if you filled in any small holes in your fabric before you began and then used a high-quality iron-on low-temperature setting so that you do not ruin the image on your print.
3- Failing to Use a High-Quality Ink
You can make your water transfer prints look good, or you can make them look bad. If you use high-quality inks, the results will undoubtedly be impressive. But if you opt for cheap stuff, the results will be ruined by streaks and smudges.
4- Failing to Apply the Ink Evenly
You can make all kinds of mistakes when applying the ink. You can use too much, and you can use too little. Worse, if you don’t use enough ink, you might leave water in some places and air in others. This means you will end up with a print that doesn’t look good.
5- Failing to Use a High-Quality Iron
You can make all sorts of mistakes when using your iron. You can use too much, and you can use too little. Worse, if you don’t heat the iron up thoroughly, you might end up with an uneven print. This makes it slightly more challenging to work with the print since parts will not be smooth.
6- Failing to Make Sure the Paper is Damp
If you fail to ensure your paper is damp when you begin, you might end up either with a print that doesn’t look good or one that won’t come out. You have to let the water transfer prints dry thoroughly before you begin using them, and it’s a good idea to use the artist’s tape on the paper so that it doesn’t move around too much.
It’s a good idea to avoid making the above mistakes when working with water transfer printing. Make sure you know what mistakes not to make, and then you’ll have an easier time with this medium.
Learn more about different types of arts skills and their demand in market, on this website: www.bigbusinessboard.net
Comments